DULUX WEATHER SHIELD
Weathershield a Premium Acrylic Exterior Wall Finish is suitable for new or previously painted exterior masonry surface such as brickwork, plaster, cement, Rendering and asbestos.
Pack Sizes
1, 4, 10 & 20 Liters
Drying Times (Single coat at standard thickness):
Touch Dry : Dependent on temperature and humidity
Recoat : 2 - 3 hrs depending on the temperature and humidity
Theoretical Coverage
On smooth surfaces of average porosity 110sqft /litre.
Surface Preparation
Surfaces must be sound, clean, dry and free from all defective or poorly Adhering material, dirt, grease or wax. Remove all loose or defective paint or powdery residues by thorough brushing and scraping, using a stiff fiber brush and high-pressure water jet. Treat any areas affected moulid, lichens, algae and moss with Dulux Fungicidal Wash. Make good minor defects with a suitable exterior grade Filler. Surfaces that remain powdery, friable or chalky after thorough preparation should be sealed with one coat of an appropriate Primer (see below). It should not be applied on areas were moisture reading (as measured by Protimeter) exceeds 14%. These walls should be left to dry further.
Note: Do not apply Weathershield during wet weather.
We Support the following Payment Methods
Card Promotions
Write a Review