24%
Off
Thames 10L Aqua Seal - Brilliant White
Model: IPTASBW10L
Rs. 30,360
Rs. 23,220
or 3 installments of Rs.
7,740
with 
-
6 M
InstallmentRs. 3,909 -
12 M
InstallmentRs. 1,954 -
18 M
InstallmentRs. 1,322 -
24 M
InstallmentRs. 1,001 -
36 M
InstallmentRs. 677 -
48 M
InstallmentRs. 571 -
60 M
InstallmentRs. 476 -
24 M
InstallmentRs. 968 -
6 M
InstallmentRs. 3,870 -
12 M
InstallmentRs. 1,935 -
20 M
InstallmentRs. 1,161 -
24 M
InstallmentRs. 992 -
12 M
InstallmentRs. 1,935
MINIMUM TRANSACTION VALUE RS.20,000 & MAXIMUM TRANSACTION VALUE RS.1,000,000
MINIMUM TRANSACTION VALUE RS.20,000 & MAXIMUM TRANSACTION VALUE RS.1,000,000
MINIMUM TRANSACTION VALUE RS.20,000 & MAXIMUM TRANSACTION VALUE RS.1,000,000
MINIMUM TRANSACTION VALUE RS.20,000 & MAXIMUM TRANSACTION VALUE RS.1,000,000
MINIMUM TRANSACTION VALUE RS.20,000 & MAXIMUM TRANSACTION VALUE RS.1,000,000
MINIMUM TRANSACTION VALUE RS.20,000 & MAXIMUM TRANSACTION VALUE RS.1,000,000
MINIMUM TRANSACTION VALUE RS.20,000 & MAXIMUM TRANSACTION VALUE RS.1,000,000
TRANSACTION VALUE RS. 10,000/- TO RS. 1,000,000/-
TRANSACTION VALUE RS. 10,000/- TO RS. 1,000,000/-
Warranty
:
6 Months
6 MONTH WARRANTY
6 MONTH WARRANTY
Delivery
:
4 - 5 Working Days
Delivery Fee
:
Rs. 0
Related products
-
22% Off
Rs. 1,500 Rs 1,170 -
2% Off
Rs. 1,750 Rs 1,710
-
24% Off
Rs. 47,380 Rs 36,240
-
12% Off
Rs. 1,360 Rs 1,200
-
23% Off
Rs. 10,480 Rs 8,020
-
23% Off
Rs. 4,410 Rs 3,380
-
24% Off
Rs. 10,110 Rs 7,730
-
24% Off
Rs. 63,990 Rs 48,950
-
24% Off
Rs. 19,000 Rs 14,530
-
23% Off
Rs. 3,290 Rs 2,520
-
24% Off
Rs. 12,760 Rs 9,760
-
24% Off
Rs. 33,620 Rs 25,710
|
Composition |
Based on aqueous solution of midified styrene based filmed. |
|
Color |
As to customer interest. Sensitive for high pigment used colors |
|
Viscosity |
10-15 cPs |
|
Minimum Film forming temperature |
5C |
|
Flash point |
Not applicable |
|
Surface preparation |
Must be clean dry & free from dust & poorly adhering materials Grease & moss growth. Extra attention should be given for heavy Oxidized areas |
|
Application |
Can be sprayed or use of roller or brush. |
|
1st Coat 2 Parts of paints to 1 part of water |
|
|
2nd Coat 3 Parts of water to 1 part of water |
|
|
3rd Coat 3 Parts of water to 1 part of water |
|
|
Application of third coat is necessary for highly damping areas And water gathering areas. |
|
|
Allowing 4-6 hours between coats & applying cross directions toPrevious coat. Do not apply when rain or drew is forecast within 24 hrs or temperature falls bellow 18C or above 30C |
|
|
Dilution |
With water |
|
Coverage |
100 – 120 Sqft per L |
|
Drying Time |
about 72 Hours at room temperature. The drying, time required is Variable in relation to the room temperature & humidity existing At the moment of application. |
|
Health & Safety |
Ensure good ventilation during application. Remove splashes From skin with soap & water. In case of contact with eyes rinse With water seek for medical advice. Equipment should be clened By water & leaving brushes or rollers unattended for more than 5 Minutes would cause to form drying of equipment. |
|
Re filling of drinking , water for tanks & fish & fauna is recommended After drying 72 hrs. |
|
|
Shelf Life & storage |
2 years maximum – Un opened protected from direct sunshine & Strong heat |
|
Packing available |
Drums of 200 L, buckets of 20L, 10L, 4L & canisters 1L |
|
Warning & Suggestions |
It is advisable to mix the product well before use. Reading & use of Product should be done as to the product label. |
We Support the following Payment Methods
Installment Plans
