Composition |
Based on aqueous solution of midified styrene based filmed. |
Color |
As to customer interest. Sensitive for high pigment used colors |
Viscosity |
10-15 cPs |
Minimum Film forming temperature |
5C |
Flash point |
Not applicable |
Surface preparation |
Must be clean dry & free from dust & poorly adhering materials Grease & moss growth. Extra attention should be given for heavy Oxidized areas |
Application |
Can be sprayed or use of roller or brush. |
1st Coat 2 Parts of paints to 1 part of water |
|
2nd Coat 3 Parts of water to 1 part of water |
|
3rd Coat 3 Parts of water to 1 part of water |
|
Application of third coat is necessary for highly damping areas And water gathering areas. |
|
Allowing 4-6 hours between coats & applying cross directions toPrevious coat. Do not apply when rain or drew is forecast within 24 hrs or temperature falls bellow 18C or above 30C |
|
Dilution |
With water |
Coverage |
100 – 120 Sqft per L |
Drying Time |
about 72 Hours at room temperature. The drying, time required is Variable in relation to the room temperature & humidity existing At the moment of application. |
Health & Safety |
Ensure good ventilation during application. Remove splashes From skin with soap & water. In case of contact with eyes rinse With water seek for medical advice. Equipment should be clened By water & leaving brushes or rollers unattended for more than 5 Minutes would cause to form drying of equipment. |
Re filling of drinking , water for tanks & fish & fauna is recommended After drying 72 hrs. |
|
Shelf Life & storage |
2 years maximum – Un opened protected from direct sunshine & Strong heat |
Packing available |
Drums of 200 L, buckets of 20L, 10L, 4L & canisters 1L |
Warning & Suggestions |
It is advisable to mix the product well before use. Reading & use of Product should be done as to the product label. |
We Support the following Payment Methods
Card Promotions
Write a Review