Thames 1L Aqua Seal - Brilliant White

Composition

Based on aqueous solution of midified styrene based filmed.

Color

As to customer interest. Sensitive  for high pigment used colors

Viscosity

10-15 cPs

Minimum Film forming temperature   

5C

Flash point  

Not applicable

Surface preparation

Must be clean dry & free from dust & poorly adhering materials Grease & moss growth. Extra attention should be given for heavy Oxidized areas

Application

Can be sprayed or use of roller or brush.

1st Coat             2 Parts of paints to 1 part of water

2nd Coat            3 Parts of water to 1 part of water

3rd Coat            3 Parts of water to 1 part of water

Application of third coat is necessary for highly damping areas And water gathering areas.

Allowing 4-6 hours between coats & applying cross directions toPrevious coat. Do not apply  when rain or drew is forecast within 24 hrs or temperature falls bellow 18C or above 30C

Dilution 

With water

Coverage

100 – 120 Sqft per L

Drying Time

about 72 Hours at room temperature. The drying, time required is Variable in relation to the room temperature & humidity existing At the moment of application.

Health & Safety

Ensure good ventilation during application. Remove splashes From skin with soap & water. In case of contact with eyes rinse With water seek for medical advice. Equipment should be clened By water & leaving brushes or rollers unattended for more than 5 Minutes would cause to form drying of equipment.

Re filling of drinking , water for tanks & fish & fauna is recommended After drying 72 hrs.

Shelf Life & storage

2 years maximum – Un opened protected from direct sunshine & Strong heat

Packing available

Drums of 200 L, buckets of 20L, 10L, 4L & canisters 1L

Warning & Suggestions

It is advisable to mix the product well before use. Reading & use of Product should be done as to the product label.